NOW VIEWING:
Warning: mysql_fetch_assoc() expects parameter 1 to be resource, null given in /home/connectp/globalpages/includes/topnav_category.php on line 2
 
Less Than 20 Seats Left for 3DCIC! Less Than 20 Seats Left for 3DCIC!…

The joint 3D Collaboration & Interoperability Congress + Quality Information Framework Symposium will be held October 3-5, 2017 in Golden,…
Silver Lake and GE Ventures Invest $40 Million in Aras Silver Lake and GE Ventures Invest $40 Million in Aras…

Aras will use this investment to drive growth, expand operations and further extend Aras' technology leadership through development and acquisitions.…
Autodesk Expands Product Design & Manufacturing Collection…

Autodesk has added Nastran In-CAD and Autodesk HSM CAM software to the collection for free, which used to cost over…
CoreTechnologie Fully Supports STEP AP242 for MBE CoreTechnologie Fully Supports STEP AP242 for MBE…

CoreTechnologie now supports reading and writing of STEP AP242 providing 3D information downstream, while maintaining PLM process flow.…
 

What are Common Uses for Silhouette Curves in Inventor?
What are Common Uses for Silhouette Curves in Inventor?…

Silhouette curves are commonly used for generating parting lines for plastic part design, or for use in multi-body part design.…
 
Workstation Processors Get Better with Intel Workstation Processors Get Better with Intel…

Jon Peddie takes a look at the new Xeon W Processors based on Skylake/Purley and provides some comparisons of Intel…
 
Print BOM from Sheet Metal Part
How do I print the BOM from the flat panel dimensions of a sheet metal part? Source: 3DCADForums…
 
Add a Round Rubber Seal to a Groove
How do I set the mates for a round rubber seal I wish to add to a groove? Source: ENG-Tips.com…
 
Sharing ILogic Files
What is the best practice for sharing ILOGIC files? Source: Autodesk Forums…
 
Inventor 2016 mould modeling
I'm trying to do some modeling which involves a set angle on vertical faces. This is because I am trying…
 
 
Is the New PLM Right for You? Surveys Reveal All
 
CAD Data Exchange & Collaboration 2015
 
 
 
What are Common Uses for Silhouette Curves in Inventor?…
Silhouette curves are commonly used for generating parting lines for plastic part design, or for use in multi-body part design.…
 
4 Ways to Use Autodesk Forge…
Autodesk's Scott Sheppard demonstrates how to use Autodesk Forge for Design Automation API, Data Management, API Model Derivative API and…
 
Are You Using the Autodesk Desktop App?…
If not, you should consider taking a peek, you may just like what you find.. Darin Greeen of Synergis EDS…
 
Troubleshooting Inventor Issues Together-Even After 10 Years…
Mark Lancaster of Synergis shares an issue with the drawing template and how clearing the occurrence name in the drawing…
 
Plethora Launches Online Service for Machined Parts Plethora Launches Online Service for Machined Parts…

With Plethora's 3D model ordering platform users can get more than quotes, such as manufacturability feedback, and solutions to design…
 
Curious About the New Annotation Tools in Inventor? Curious About the New Annotation Tools in Inventor?…

Join ASCENT's free webcast on Wednesday, August 30 from 12:00 PM - 1:00 PM EST to learn how create and…
 
HP Debuts Virtual Reality Solutions & Services at Siggraph HP Debuts Virtual Reality Solutions & Services at Siggraph…

HP unveiled the the new HP Z VR Backpack, a wearable Virtual Reality (VR) PC for product and building design.…
 
 
Easier Automation with iLogic and More in Inventor 2018.1 Easier Automation with iLogic and More in Inventor 2018.1…

The 2018.1 update adds MBD enhancements like assembly level tolerancing and annotations, a new iLogic feature and faster drawing capabilities.…
Contex Debuts New IQ FLEX Large Format Flatbed Scanner Contex Debuts New IQ FLEX Large Format Flatbed Scanner…

The IQ FLEX can save files in standard file formats or raster format for use in any CAD or GIS…
Datakit Announces Version 2017.3 of its CAD Conversion Tools Datakit Announces Version 2017.3 of its CAD Conversion Tools…

Datakit's applications now support the conversion of Inventor 2018, 3DXML and are able to write JT 9.5 files (ISO standard).…
Carl Bass Joins Formlabs Board of Directors Carl Bass Joins Formlabs Board of Directors…

3D printer company Formlabs appointed technology veteran and former Autodesk CEO, Carl Bass, as an independent director of the company.…
BlueCielo Launches Mobile App for Asset Documents BlueCielo Launches Mobile App for Asset Documents…

The BlueCielo Meridian Mobile app for iOS, Android and Windows devices provides reviewers of asset documents the ability to work…
Get a Discount on CIMdata's PLM Certificate Program Get a Discount on CIMdata's PLM Certificate Program…

ConnectPress members can receive a discount on the fall PLM education event coming to the Boston area from October 2-6.…
Keep Up with Emerging Technologies with Evolve360 Keep Up with Emerging Technologies with Evolve360…

Evolve360 is an annual subscription giving users unlimited access to MasterGraphics' portfolio of training courses for Autodesk products.…
Configuration of Model-Based Definition in Inventor 2018…

MBD will become an important tool for users wishing to review part model designs before the 2D drawing is created…
 
JPR Compares Dell Model to @Xi Mobile Workstation JPR Compares Dell Model to @Xi Mobile Workstation…

JPR compares @Xi Computer's @Xi PowerGo 15/7 mobile workstation to the Dell Precision 5510. What do they think? Find out…
4 Ways to Use Autodesk Forge 4 Ways to Use Autodesk Forge…

Autodesk's Scott Sheppard demonstrates how to use Autodesk Forge for Design Automation API, Data Management, API Model Derivative API and…
GK Machine Takes on Complex Specialty Projects with Autodesk GK Machine Takes on Complex Specialty Projects with Autodesk…

With the help of KETIV, the industrial equipment supplier implemented Autodesk Inventor and Vault to make its processes more efficient.…
Got 20 Minutes? See ANSYS AIM in Action Got 20 Minutes? See ANSYS AIM in Action…

If you're a design engineer hesitant to learn engineering simulation software then this short session is for you. See how…
ANSYS AIM Streamlines Shell and Tube Heat Exchanger Design ANSYS AIM Streamlines Shell and Tube Heat Exchanger Design…

ANSYS AIM provides all of the physical models and simulation tools needed to diagnose and optimize a heat exchanger within a…
Zero-post Processing with Rize's APD Technology Zero-post Processing with Rize's APD Technology…

This paper will define Rize's one-of-a-kind Augmented Polymer Deposition (APD), how it works and describe the advantages of the technology.…
Rize One 3D Printer Speeds Part Turnaround 20% Rize One 3D Printer Speeds Part Turnaround 20%…

A global consumer packaged goods manufacturer compared the part turnaround speed and costs of their Stratasys Fortus and Rize One…
3D Printing: The Impact of Post-Processing 3D Printing: The Impact of Post-Processing…

Industry expert, Todd Grimm, interviewed six global manufacturers to learn the impact of post-processing on time, cost, quality, and more.…
Are You Using DfX Practices? Are You Using DfX Practices?…

This spring ConnectPress and Geometric (now part of HCL Technologies) surveyed readers to see how they were deploying Design for…
Workstation Processors Get Better with Intel…
Jon Peddie takes a look at the new Xeon W Processors based on Skylake/Purley and provides some comparisons of Intel processors.
 
GK Machine Takes on Complex Specialty Projects with Autodesk…
With the help of KETIV, the industrial equipment supplier implemented Autodesk Inventor and Vault to make its processes more efficient.
 
Digital Twins: Extending Essential Collaboration…
Avatars for products and product-related lifecycle processes are being incorporated into PLM as PLM solutions are enhanced for avatars.
 
New Dell Technologies Uniquely Positioned for IoT…
MI&S believes Dell can help customers solve its IoT puzzle, offering solutions for predictive maintenance, improving facilities management and more.
 
Ship Propeller Made Using Hybrid Manufacturing…
Autodesk is helping Port of Rotterdam's RAMLAB reach its goals for on-demand replacement ship parts, combining additive and subtractive manufacturing.
 
KETIV's Scott Oshito Receives Award for Inventor Design…
KETIV's Scott Oshita was tasked to design and build an animatronic horse with one month for the movie True Grit. Learn about his use of Inventor.